Product features

• The dosage is low, making the construction process convenient;

• It has stable friction enhancement performance;

• It can effectively reduce tire noise;

• The mechanical strength is good, the wear resistance is excellent, and the service life is long

Scope of application

Suitable for underground garages and industrial floors with anti-slip requirements, such as warehouses and workshops in industries like machinery, food, and textile.

Construction section

Notes

• The air humidity should be strictly controlled to be less than 80%. When the humidity is too high, problems such as loss of gloss, color bleeding, and color fading may occur.

• The super wear-resistant micro-bead topcoat is a gloss layer. It must be applied on a surface layer with a certain thickness and the same color. If it is applied directly on the putty layer, it may cause oil shrinkage and cannot ensure good covering power and poor wear resistance, etc.

• This product cannot be randomly added with thinner. Otherwise, it is prone to color bleeding problems.

• When applying the super wear-resistant micro-bead topcoat, attention should be paid to controlling the amount. Different amounts will result in certain differences in gloss. The number of roller coats should not be less than three, until the overall amount is uniform and there are no obvious roller marks.

• There will be slight joint marks during the micro-bead coating process. When doing large-scale construction, it is recommended to use the joint position as the joint point, which can effectively reduce the joint marks.

• If there are special requirements for wear resistance, a water-based polyurethane gloss can be used to improve the hardness and scratch resistance of the paint film.

• There is a certain color difference between different batches of materials. When applying in the same area, the same batch of materials should be used. When placing multiple orders for the same project, it is necessary to indicate to adjust the color according to the sample.

Technical Statement

Our company can design construction plans of different specifications (thickness, effect, etc.) through flexible matching and combination of various products to meet the personalized requirements of all kinds of customers. To ensure that your project can select the appropriate floor system, please consult our professional technical advisors. However, when using our company's products, please strictly follow the construction process, dosage requirements and precautions of the product. Otherwise, our company will not bear any responsibility for the quality of the project or any losses.

Construction conditions

• Air temperature: 5℃ – 30℃

• Relative humidity: < 80%

• Moisture content on substrate surface: < 8%

• The construction site should have good ventilation;

• Dew point temperature: The substrate and uncurdled coating substrate must be 3℃ or more higher than the dew point temperature to reduce the risk of condensation or frosting on the floor coating.

• Dirty floors need to be thoroughly cleaned; otherwise, it may affect the even application of the coating.