Product features

• Strong adhesion and good flexibility;

• The coating is dense, the surface is smooth and it is extremely easy to clean.

• The coating is wear-resistant, impact-resistant, pressure-resistant and has a long service life.

• Oil-resistant, water-resistant and various organic and inorganic chemical media;

• Good insulating properties;

• The construction is fast and the cost is low

Scope of application

Applicable to the concrete surfaces inside various buildings

Electrical, electronic and mechanical manufacturing factories, workshops, warehouses

Food, medicine, chemical industry, tobacco, textile, clothing

Furniture, light industry, plastics, manufacturing of cultural and sports goods, parking lots

Hypermarkets, etc.

Notes

• The construction environment temperature should be 0-35℃, and the relative humidity should be 20%-80%.

• When the temperature is too low, the drying process slows down; when it is too high, it causes difficulties in construction.

• If the humidity is too low, it may cause incomplete drying, poor adhesion and other defects. If the humidity is too high, it is easy to have bubbles and heat rash.

• For severely sandy and dusty floors, the amount of primer used will increase. It is recommended to use the primer to fully penetrate and reinforce until the overall color of the concrete is uniform without whitening, which can prevent the floor from peeling and hollowing.

• When applying the topcoat by roller, it is necessary to ensure that the overall amount is uniform. There should be no flowing or piling of materials, otherwise the problem of mottling will occur.

• After the colored paint is applied, the topcoat must be completed within the specified time; otherwise, it will affect the adhesion of the topcoat layer.

• When applying topcoat containing red pigment, there will be a problem of floating color and mottling. It is recommended to switch to epoxy topcoat for construction.

• This material has a strong odor. It is recommended to wear protective equipment during construction and avoid continuous construction for a long time.

• The construction site should have good ventilation. Construction should be stopped when feeling unwell and ventilation and air exchange should be carried out in time.

Technical Statement

To ensure that your project can select the appropriate floor system, please consult our professional technical advisors. For special colors or effect designs, we can manufacture them according to your requirements. Our company can form design schemes of different specifications (thickness, effect, etc.) through flexible matching and combination of various products to meet the personalized requirements of all kinds of customers.

Construction section

Construction conditions

• Air temperature: 0℃ - 35℃

• Relative humidity: 20%-80%

• Moisture content of the base material surface: < 8%

• The construction site should have good ventilation

• Dew point temperature: The substrate and the substrate of the uncured coating must be at least 3℃ higher than the dew point temperature to reduce the risk of condensation or mottling of the ground coating

• For specific details, please refer to the construction plan.